vs-30ctq...spbf, vs-30ctq...-1pbf series www.vishay.com vishay semiconductors revision: 08-dec-14 1 document number: 94193 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 high performance schottky rectifier, 2 x 15 a features ? 175 c t j operation ? center tap configuration ? low forward voltage drop ? high frequency operation ? high purity, high temperature epoxy encapsulation for enhanced mechanical strength and mois ture resistance ? guard ring for enhanced ruggedness and long term reliability ? meets msl level 1, per j-std-020, lf maximum peak of 260 c ? aec-q101 qualified ? material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912 description this center tap schottky rectif ier series has been optimized for low reverse leakage at high temperature. the proprietary barrier technology allows for reliable operation up to 175 c junction tempera ture. typical applications are in switching power supplies, converters , freewheeling diodes, and reverse battery protection. ? product summary package to-263ab (d 2 pak), to-262aa i f(av) 2 x 15 a v r 80 v to 100 v v f at i f 0.67 v i rm 7 ma at 125 c t j max. 175 c diode variation common cathode e as 7.5 mj to-262aa to-26 3 ab (d 2 pak) v s - 3 0ctq... s p b fv s - 3 0ctq...-1p b f ba s e common cathode anode anode common cathode 1 3 2 2 ba s e common cathode anode anode common cathode 1 3 2 2 major ratings and characteristics symbol characteristics values units i f(av) rectangular waveform 30 a v rrm 80/100 v i fsm t p = 5 s sine 850 a v f 15 a pk , t j = 125 c (per leg) 0.67 v t j range -55 to 175 c voltage ratings parameter symbol vs-30ctq080spbf VS-30CTQ080-1PBF vs-30ctq100spbf vs-30ctq100-1pbf units maximum dc reverse voltage v r 80 100 v maximum working peak reverse voltage v rwm absolute maximum ratings parameter symbol test conditions values units maximum average forward current, see fig. 5 per device i f(av) 50 % duty cycle at t c = 129 c, rectan gular waveform 30 a per leg 15 maximum peak one cycle non-repetitive surge current per leg, see fig. 7 i fsm 5 s sine or 3 s rect. pulse following any rated load condition and with rated v rrm applied 850 10 ms sine or 6 ms rect. pulse 275 non-repetitive avalanche energy per leg e as t j = 25 c, i as = 0.50 a, l = 60 mh 7.50 mj repetitive avalanche current per leg i ar current decaying linearly to zero in 1 s ? frequency limited by t j maximum v a = 1.5 x v r typical 0.50 a
vs-30ctq...spbf, vs-30ctq...-1pbf series www.vishay.com vishay semiconductors revision: 08-dec-14 2 document number: 94193 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note (1) pulse width < 300 s, duty cycle < 2 % electrical specifications parameter symbol test conditions values units maximum forward volt age drop per leg ? see fig. 1 v fm (1) 15 a t j = 25 c 0.86 v 30 a 1.05 15 a t j = 125 c 0.67 30 a 0.82 maximum reverse leakage current per leg ? see fig. 2 i rm (1) t j = 25 c v r = rated v r 0.55 ma t j = 125 c 7.0 maximum junction capacitance per leg c t v r = 5 v dc (test signal range 100 khz to 1 mhz), 25 c 500 pf typical series inductance per leg l s measured lead to lead 5 mm from package body 8.0 nh maximum voltage rate of change dv/dt rated v r 10 000 v/s thermal - mechanical specifications parameter symbol test conditions values units maximum junction and storage ? temperature range t j , t stg -55 to +175 c maximum thermal resistance, ? junction to case per leg r thjc dc operation 3.25 c/w maximum thermal resistance, ? junction to case per package 1.63 typical thermal resistance, ? case to heatsink r thcs mounting surface, smooth and greased 0.50 approximate weight 2g 0.07 oz. mounting torque minimum 6 (5) kgf ?? cm (lbf ?? in) maximum 12 (10) marking device case style to-263ab (d 2 pak) 30ctq100s case style to-262aa 30ctq100-1
vs-30ctq...spbf, vs-30ctq...-1pbf series www.vishay.com vishay semiconductors revision: 08-dec-14 3 document number: 94193 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 1 - maximum forward voltage drop characteristics (per leg) fig. 2 - typical values of reverse current vs. reverse voltage (per leg) fig. 3 - typical junction capacitance vs. reverse voltage (per leg) fig. 4 - maximum thermal impedance z thjc characteristics (per leg) 1 10 100 1000 i f - instantaneous forward current (a) v fm - forward voltage drop (v) 1.5 2.0 2.5 1.0 0.5 0 t j = 175 c t j = 125 c t j = 25 c 0.0001 0.001 0.01 0.1 i r - reverse current (ma) v r - reverse voltage (v) 40 100 80 20 060 100 1 10 t j = 175 c t j = 150 c t j = 125 c t j = 100 c t j = 75 c t j = 50 c t j = 25 c c t - junction capacitance (pf) v r - reverse voltage (v) 80 100 40 20 060 100 1000 t j = 25c 0.001 0.1 0.01 1 10 0.00001 0.0001 0.001 0.01 0.1 1 t 1 - rectangular pulse duration (s) z thjc - thermal impedance (c/w) 100 10 single pulse (thermal resistance) d = 0.75 d = 0.50 d = 0.33 d = 0.25 d = 0.20 p dm t 1 t 2 notes: 1. duty factor d = t 1 /t 2 2. peak t j = p dm x z thjc + t c
vs-30ctq...spbf, vs-30ctq...-1pbf series www.vishay.com vishay semiconductors revision: 08-dec-14 4 document number: 94193 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 5 - maximum allowable case temperature vs. average forward current (per leg) fig. 6 - forward power loss characteristics (per leg) fig. 7 - maximum non-repetiti ve surge current (per leg) fig. 8 - unclamped inductive test circuit note (1) formula used: t c = t j - (pd + pd rev ) x r thjc ; ? pd = forward power loss = i f(av) x v fm at (i f(av) /d) (see fig. 6); ? pd rev = inverse power loss = v r1 x i r (1 - d); i r at v r1 = 10 v 100 130 150 160 170 140 120 110 180 allowable case temperature (c) i f(av) - average forward current (a) 24 10 12 14 6 0 8 see note (1) square wave (d = 0.50) 80 % rated v r applied dc 0 4 3 2 1 5 6 7 average power loss (w) i f(av - average forward current (a) 4810 12 6 2 0 dc rms limit d = 0.20 d = 0.25 d = 0.33 d = 0.50 d = 0.75 100 1000 i fsm - non-repetitive surge current (a) t p - square wave pulse duration (s) 100 1000 10 000 10 at any rated load condition and with rated v rrm applied following surge current monitor high-speed switch d.u.t. r g = 25 + freewheel diode v d = 25 v l irfp460 40hfl40s02
vs-30ctq...spbf, vs-30ctq...-1pbf series www.vishay.com vishay semiconductors revision: 08-dec-14 5 document number: 94193 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ordering information table ordering information (example) preferred p/n quantity per reel minimum order quantity packaging description vs-30ctq080spbf 50 1000 antistatic plastic tubes vs-30ctq080strrpbf 800 800 13" diam eter plastic tape and reel vs-30ctq080strlpbf 800 800 13" diam eter plastic tape and reel VS-30CTQ080-1PBF 50 1000 antistatic plastic tubes vs-30ctq090spbf 50 1000 antistatic plastic tubes vs-30ctq090strrpbf 800 800 13" diam eter plastic tape and reel vs-30ctq090strlpbf 800 800 13" diam eter plastic tape and reel vs-30ctq090-1pbf 50 1000 antistatic plastic tubes vs-30ctq100spbf 50 1000 antistatic plastic tubes vs-30ctq100strrpbf 800 800 13" diam eter plastic tape and reel vs-30ctq100strlpbf 800 800 13" diam eter plastic tape and reel vs-30ctq100-1pbf 50 1000 antistatic plastic tubes links to related documents dimensions to-263ab (d 2 pak) www.vishay.com/doc?95046 to-262aa www.vishay.com/doc?95419 part marking information www.vishay.com/doc?95008 packaging information www.vishay.com/doc?95032 080 = 80 v 100 = 100 v 2 - current rating (30 a) 3 - circuit configuration: c = common cathode 4 - t = to-220 5 - s chottky q s erie s 6 - voltage rating s 7 - s = d 2 pak -1 = to-262 8 - none = tube (50 piece s ) trl = tape and reel (left oriented - for d 2 pak only) trr = tape and reel (right oriented - for d 2 pak only) - pbf = lead (pb)-free 9 1 -vi s hay s emiconductor s product device code 5 1 3 2 4 6 7 8 9 vs- 30 c t q 100 s trl pbf
document number: 95014 for technical questi ons concerning discr ete products, contact: diodes-tech@vishay.com www.vishay.com revision: 31-mar-09 for technical questi ons concerning module products, contact: ind-modules@vishay.com 1 d 2 pak, to-262 outline dimensions vishay high power products dimensions for d 2 pak in millimeters and inches notes (1) dimensioning and toleranc ing per asme y14.5 m-1994 (2) dimension d and e do not include mold flash. mold flash shall not exceed 0.127 mm (0.005") per side. these dimensions are measured at the outmost extremes of the plastic body (3) thermal pad contour optional within dimension e, l1, d1 and e1 (4) dimension b1 and c1 apply to base metal only (5) datum a and b to be determined at datum plane h (6) controlling dimension: inch (7) outline conforms to jedec outline to-263ab symbol millimeters inches notes symbol millimeters inches notes min. max. min. max. min. max. min. max. a 4.06 4.83 0.160 0.190 d1 6.86 8.00 0.270 0.315 3 a1 0.00 0.254 0.000 0.010 e 9.65 10.67 0.380 0.420 2, 3 b 0.51 0.99 0.020 0.039 e1 7.90 8.80 0.311 0.346 3 b1 0.51 0.89 0.020 0.035 4 e 2.54 bsc 0.100 bsc b2 1.14 1.78 0.045 0.070 h 14.61 15.88 0.575 0.625 b3 1.14 1.73 0.045 0.068 4 l 1.78 2.79 0.070 0.110 c 0.38 0.74 0.015 0.029 l1 - 1.65 - 0.066 3 c1 0.38 0.58 0.015 0.023 4 l2 1.27 1.78 0.050 0.070 c2 1.14 1.65 0.045 0.065 l3 0.25 bsc 0.010 bsc d 8.51 9.65 0.335 0.380 2 l4 4.78 5.28 0.188 0.208 c b detail a c2 a a a 0.004 b m a lead tip (3) (3) v ie w a - a (e) (d1) e1 b h a1 detail ?a? rotated 90 cw scale: 8 :1 l ga u ge plane 0 to 8 l3 l4 seating plane section b - b and c - c scale: n one (4) (4) ( b , b 2) b 1, b 3 (c) c1 base metal plating conforms to jedec outline d 2 pak (smd-220) 13 2 d c a l2 e (2)(3) (2) 4 h bb 2 x b 2 x b 2 l1 0.010 a b mm (3) e 2 x pad layout mi n . 11.00 (0.43) mi n . 9.65 (0.3 8 ) mi n . 3. 8 1 (0.15) mi n . 2.32 (0.0 8 ) 17.90 (0.70) 15.00 (0.625) 2.64 (0.103) 2.41 (0.096) lead assignments diodes 1. - anode (t w o die)/open (one die) 2., 4. - cathode 3. - anode
www.vishay.com for technical questions c oncerning discrete products, contact: diodes-tech@vishay.com document number: 95014 2 for technical questions concer ning module products, contact: ind-modules@vishay.com revision: 31-mar-09 outline dimensions vishay high power products d 2 pak, to-262 dimensions for to-262 in millimeters and inches notes (1) dimensioning and tolerancing as per asme y14.5m-1994 (2) dimension d and e do not include mold flash. mold flash shall not exceed 0.127 mm (0.005") per side. these dimensions are measured at the outmost extremes of the plastic body (3) thermal pad contour optional within dimension e, l1, d1 and e1 (4) dimension b1 and c1 apply to base metal only (5) controlling dimension: inches (6) outline conform to jedec to-262 except a1 (maximum), b (minimum) and d1 (minimum) where dimensions derived the actual package outline symbol millimeters inches notes min. max. min. max. a 4.06 4.83 0.160 0.190 a1 2.03 3.02 0.080 0.119 b 0.51 0.99 0.020 0.039 b1 0.51 0.89 0.020 0.035 4 b2 1.14 1.78 0.045 0.070 b3 1.14 1.73 0.045 0.068 4 c 0.38 0.74 0.015 0.029 c1 0.38 0.58 0.015 0.023 4 c2 1.14 1.65 0.045 0.065 d 8.51 9.65 0.335 0.380 2 d1 6.86 8.00 0.270 0.315 3 e 9.65 10.67 0.380 0.420 2, 3 e1 7.90 8.80 0.311 0.346 3 e 2.54 bsc 0.100 bsc l 13.46 14.10 0.530 0.555 l1 - 1.65 - 0.065 3 l2 3.56 3.71 0.140 0.146 (4) (4) base metal plating b 1, b 3 ( b , b 2) c1 c section b - b and c - c scale: n one section a - a (3) e1 (3) d1 e b a a a c2 c a1 seating plane lead tip (3) (2) (3) (2) a e (dat u m a) l1 l2 b b c c 3 2 1 l d 2 x e 3 x b 2 3 x b 0.010 a b mm modified jedec outline to-262 lead assignments diodes 1. - anode (t w o die)/open (one die) 2., 4. - cathode 3. - anode
legal disclaimer notice www.vishay.com vishay revision: 13-jun-16 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
